AnonyMouse_2995 Posted February 27, 2007 Share Posted February 27, 2007 Hello, Ofsted inspectors came to register the nursery, they now want us to calculate the space ratio to establish how many children they can register us for, l am not good with converting sq metres to foot and figures. i know the ratio per child under 2 is 3.5,sq m over 2 2.5 , 3 is 2.3. Any mathematical genuis, your help would be most appreciated sample guidance would be most appreciated thank you Toro Quote Link to comment Share on other sites More sharing options...
Steve Posted February 27, 2007 Share Posted February 27, 2007 Not that great myself Toro, but wouldn't it be easier just to measure your floor space in metres and use the metric ratios you have, rather than try to convert it all to feet and inches? Quote Link to comment Share on other sites More sharing options...
AnonyMouse_3139 Posted February 27, 2007 Share Posted February 27, 2007 I thought they did the measuring for you. They did when playgroup went into additional premises and when my friends private DN expanded. Quote Link to comment Share on other sites More sharing options...
AnonyMouse_7317 Posted February 27, 2007 Share Posted February 27, 2007 we recently opened a new provision and the inspector turned up with a very large tape measure!!! which was just as well as my maths is lousy Quote Link to comment Share on other sites More sharing options...
Guest Posted February 27, 2007 Share Posted February 27, 2007 Maybe things have changed! They worked ours out for us, I wouldnt have a clue either. Surely its for them to tell us, not for us to tell them Quote Link to comment Share on other sites More sharing options...
AnonyMouse_4495 Posted February 27, 2007 Share Posted February 27, 2007 (edited) It's not that hard to do if you have a long tape measure.... You need to draw a plan of the room(s) then measure each wall in metres and centimetres. Multiply one wall length by the other (assuming you have a proper square/rectangle) if not, make the large space into a rectangle, then measure the left over space and add the two together. (remember measuring odd shaped spaces in maths at school?) If anything is 'fixed' i.e. cannot be moved, it will need to be measured and taken off the final measurements (sinks, bookshelves, storage) You will then have a 'total available floor space' square metre figure. All you have to do is then divide this figure by the figure for the 'metres per child' for the age group that are going to be in that room.... I have done a quick plan with not to scale measurements and grey 'fixed' objects - I hope that this makes sense and offers some help...? RB x ROOM_PLAN.doc Edited February 27, 2007 by Running Bunny Quote Link to comment Share on other sites More sharing options...
AnonyMouse_2995 Posted February 28, 2007 Author Share Posted February 28, 2007 ello again I cannot thank you enough for your fast responses, I was under the impression that they will Provide the numbers and measurement, this inspector just could not be bother. Bunny I cannot download the example and thank you. Thanks again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.